How to add an extender to an EasyMesh network as a satellite device - ยินดีต้อนรับสู่เว็บไซด์ MERCUSYS

EasyMesh routers and extenders can work together to form one unified Wi-Fi network. Walk through your home and stay connected with the fastest possible speeds thanks to EasyMesh’s seamless coverage.

Note: Routers and extenders must be compatible with EasyMesh. Firmware upgrades may be required. Visit https://www.mercusys.com/solution/easymesh/ for a complete list of EasyMesh-compatible devices.

Step 1 Enable EasyMesh on the Main Router. Here, we take a Mercusys Main Router as an example.

1. Visit http://mwlogin.net and log in with your Mercusys ID or the password you set for the router.

2. Go to Advanced > EasyMesh, and enable EasyMesh.

A picture displays Easymesh button on the top, add satellite devices button on the bottom.

Step 2 Plug in the extender next to the main router.

Step 3 Press the WPS button

1. Within 2 minutes, press the WPS button on the main router and on the extender. Wait until the WPS process is complete.

2. Done! You can check the mesh device on the main router’s web page, too.

A picture display the satellite range extender on the list with IP address, location, clients, connection, and modify option.